Combi CM136

The Super Comby EX is the most versatile feed out machine on the market. It literally feeds out every supplementary type of feed you can lay your hands on, including all bale types, shapes and sizes with an in-built bale loading system. And any type of loose feed that can be loaded with a loader including fine chop silage, maize silage, root-crops, vegetables and more.

Comby feeders are the only multi feeder on the market that is scalable, meaning should you grow your operation, you’re not up for a new feeder.  Simply add the forks and bin to any standard machine and the load level capacity increases from 13.0m3 – 15.0m3.

See it in action

Benefits

  • VERSATILITY – If you’re feeding a combination of bales, silage, root-crops or any other supplementary feed, then the Super Comby EX is the only feeder you’ll need. Super Comby EX is able to feed all types, shapes and sizes bales including straw, hay and baled silage, fine chop silage, maize silage, root crops and literally any type of feed you can lay your hands on. The unique elevator design delivers feed out of the side of the machine allowing you to feed into troughs, feed-pads, bunks or open pasture
  • CONTROL – The unique design of the Super Comby EX provides the operator with more control and visibility of the task at hand. More control over the feed-row lets you maximise your feed by varying from light for sheep and deer to the heavier row for feeding cattle and anything in between with no big clumps left in the pasture. The ability to see the entire load from the comfort of your seat puts you in control of feeding
  • RELIABILITY – The combination of a tough, well-proven design with the design smarts of the unique load dividing system reduces loads and stresses on drives, motors, shafts and the floor extending the working life, reducing maintenance and less to wear out which lets you spend more time feeding out, less time in the workshop.
  • EASY TO USE – With a simple Joystick Control Feeding System only 2 double acting hydraulic outlets are required to operate the entire machine. Elevator, loading forks, main floor and cross floor giving you more control, from your fingertips. You have full control of the feed material, being able to forward and reverse all floor movements.
  • SCALABILITY – With the Super Comby EX you have the ability to up-size your multi-feeder as your farm grows, without the need to upgrade to a new wagon. Add the rear bin at any time to the standard 13 cbm Super Comby EX to increase capacity to 15 cbm.
  • COMPACT – The Super Comby EX is the most compact and manoeuvrable silage feeder and/or bale feeder in the 13 cbm class than to the ability to load the entire feeder, including the cross floor.
  • ACCURATE FEED DELIVERY – All Comby feeders now come load cell ready as standard, which allows you to add the weighing option when it suits your operation so you can accurately measure the correct amount your herd needs, reducing waste and increasing the performance of your farm.

Specifications

CAPACITY

  • Round Bales: 4-8 (5-9 with optional forks)
  • Medium Square Bales: 6-8 (8-10 with optional forks)
  • Large Square Bales (8ft): 5 (6 with optional forks)
  • Loose silage (load level): 13m3 (15m3 with optional bin extension)
  • Loose silage (heaped load): 15.5m3 (17m3 with optional bin extension)
  • Optional Grain Feeding System: 800kg
  • Optional Causmag spreader: 75kg

SPECIFICATIONS

  • Overall width:  2900mm
  • Overall length:  7180mm (9580mm with optional forks)
  • Overall height/loading height: 1950mm
  • Tare weight:  2960kg (3470kg with forks and bin)
  • Tare weight optional grain feeding system:  300kg
  • Standard tyres:  400/60 x 15.5AW
  • Axle:  6 stud x 70mm sq, tandem oscillating
  • Brakes: Optional 2 or 4 wheel braking
  • Weigh Scales: Optional 6 cell
  • Floor: Welded steel floor
  • Joystick:  In-cab electric fingertip control
  • Hydraulics required: 2 pair double acting (additional 1 pair double acting required for forks)
  • Elevator: 1635mm wide chain/slat
  • Jack: 80mm screw, with quick adjustment

Features

Tilting Elevator

Allows the operator to easily feed into troughs bunks or pasture, and to vary the thickness of the feed-line. The generous overhang eliminates feed being driven over by the wheels, whilst maintaining stability.

finger-tip-control-2

Finger Tip Control

Standard in-cab electric joystick gives fingertip control over the entire feeder, letting you control the feed row of any feed type and density.

1635mm wide elevator

The widest elevator on the market, handle any shape or size of supplementary feeds, even the largest of 5’ bales. And the chain/slat design never slips or stretches like that of a conveyor belt. The new design has a 500mm longer elevator.

Positive Drive Cross Conveyor

Minimal maintenance, ultra-high breaking strain and a positive drive. Never worry about a derailed or stretched conveyor belt again.

Strong RHS Bars

RHS bars are substantially stronger torsionally than angle type bars of same size. We’ve used RHS bar on all floors for strength and reliability.

Load Dividing

The unique load dividing design utilises the entire body for storage capacity, making for a more compact and manoeuvrable feeder with better visibility of the load and more weight transferred to the tractor, especially important when operating in the field.

Lower Maintenance

with only one floor that runs continuously and the remaining 2 floors move on demand, this substantially reduces maintenance compared to that of a traditional silage wagon.

Load Cell Ready

All new comby wagons come weigh-scale ready from the factory, providing you with a future-proofed feeding solution and easy entry into the world’s best silage feeders. The unique design weighs the entire feeder, whether parked or on the tractor.

Steel Floor

With the all steel floor design that lasts the lifetime of the feeder, you’ll never need to worry about broken board breaking a chain, or rotting out from the exposure to silage juices.

Covered Shafts

New Thermoform floor covers the driveshaft’s which eliminates any possibility of feed wrapping around the shafts or jamming.

Combi Feeders Chainless Rear Floor -HD axle

HD Axles

The toughest axle design on the market by a country mile, giving total peace of mind, and eliminating any possibility of downtime.

Combi Feeder Chainless Rear Floor - Large Suspension Travel

Large Suspension Travel

The oscillation of the tandem axle allows for traveling over the most rugged terrain with ease.

Folding tailgate

The new tailgate design makes for quicker and easier operation and stores neatly along the side of the feeder.

Bale manipulator

The patented bale manipulator aids the loading of large round bales and can be operated from the operators seat on the tractor.

Hose Holder

The built in hose holder, keeps hoses neatly stored out of the dirt when unplugged from the tractor.

Protected Hydraulics

The hydraulic valves are nicely protected from the weather, mud and other contaminants. Another built-in downtime saver.

Easy Connection

only 2 pair of double acting hydraulic remotes and a trailer plug connection are required to power the Super Comby EX, and the close off tap makes connecting and dis-connecting to the tractor very quick and easy.

Safety Chains

Standard the Super Comby EX comes with safety chains, for added operator safety both on and off the road.

Forged Towing Eye

The approved towing eye offers 360 degree rotation to protect your tractor and can be locked to simplify hooking up with a quick-hitch.

Combi Feeder Chainless Rear Floor - HD Jack

Heavy Duty Jack

The tough 80mm screw jack with the largest support area, means the jack supports the machine better whilst loading.

Mudguards

Standard the Super Comby EX is fitted with full length mudguards to protect your feed from contamination and keep the feeder clean.

Smooth inside walls –

Welded Body

The fully welded body eliminates the need for bolt or rivets which when subject to vibration or flex can loosen.

Protected Hoses

Protected Hoses

The hoses on the Super Comby EX are protected from chaffing, another downtime eliminator.

HD Drives

The simple but heavy duty drives require very minimal maintenance and handle the heaviest of loads.

What our customers are saying

“The machine is not like a processor where you’re losing all the leaves off it, the leaves are coming off with the stems, and the cattle don’t have to lick them off the ground”

Mulvey Gulch Ranch (USA) - Super Comby EX

“It’s much more efficient than the other wagons we had, faster, and you can feed bales”

Daniel Arismendi, Manuka Farms (Chile) - Super Comby EX
Test aus

“We brought the Hustler feedout wagon because of its simplicity and the diversity of being able to go from pit silage to round silage which was a great asset”

Trent Adams, Chatsworth House (Australia) - Super Comby EX

Unique to Hustler is a Grain Feeding System that is designed for Comby Feeder Wagons, but can be fitted to Silage Wagons of any colour and adds whole new level of versatility to the Feedout wagon, and you can save an extra pass in the field Everyday.

Ron, Wairarapa (New Zealand) - Super Comby EX
Mark James

Irongate Wagyu, located near Albany, Western Australia, produce the finest Wagyu beef. We caught up with 30 year beef cattle veteran Mark James who manages the herd, to see why he chose Hustler’s unique Comby feeder…

Mark James, Irongate Wagyu, Albany (West Australia) - Super Comby EX

Newsletter Signup

Get Out There, in Hustler Country episodes and the latest news

Back to Top