Our work horse self-loading, 3 point hitch mounted square and round bale feeder, with the game changing X series feeding system which processes every type of square or round bale with ease, even the tightest of dry hay bales or the ugliest of soggy silage bales.
Bale size round: 4’ X 4’ – 6’ X 4’
Bale size square: All sizes. Over 6’ long requires optional platform extension
Capacity: 1 bale
Unit weight: 640kg
Tractor size: 80hp +
Hydraulics required: 2 X double-acting, 30-60 litres/min, 2250-3000 psi
Loading: Integrated self-loading system
Size (L x W x H): 1935 x 2648 x 1271 mm
The addition of a new Axial Rotor with centralising paddles keeps the bale positioned in the centre of the feeding chamber to minimise wastage and provide better grip on soft bales.
The Chainless X2000 is the most versatile bale feeder, it will feed out any bale, round & square.
Infinite variation in feed control allows you to feed thick for cattle, thin for sheep to increase the palatability for your stock.
Hustler’s proven polyethylene platforms with ribbed design keeps bales tracking straight and with 30% less friction than steel it reduces drag on the bale which makes feeding out sticky bales easier and it will never corrode. The X2000’s platform is wider to reduce waste with sloppy bales.
The Easy Clean Hypaflo Wiper Panel minimises blockages and ensures that hay drops outside the wheel tracks to avoid being flattened into the mud. A quick release latch releases the wiper panel for easy cleaning.
New sandblasted finish and improved paint system means your new Chainless X2000 will look smarter for longer.
A quick release latch releases the wiper panel for easy cleaning.
Many hours of research and development have gone into the shape of the teeth to makes them clean easier, and have more aggression on tight bales.
We’ve used specifically designed forged bale spears which pierce the bale rather than pushing it and are longer which reduces bale sag even with the wettest of bales, another innovation from Hustler.
High mounted connection latches on both sides of the feeder take the load off the cradle, which removes any load from the bale spears. This provides a more reliable, positive connection to handle the heavier bales it has been tested to handle.
We’ve made one tyne longer than the other for quick and easy alignment when reconnecting the cradle. You’ll only need to line up one tyne, then back straight in.
We’ve protected the motor from coming into contact with the tractor tyre, which can save you costly downtime and repairs when your tractor has short linkage arms.
We’ve included two grab bars, so you can tie the square bale strings to the platform. This saves the operator having to remove the strings before feeding out.
We’ve eliminated troublesome bushes from the drive system of the new X2000, this reduces maintenance, increases service life, reduces the need for frequent greasing and saves you a whole lot of frustration.
Built to take the heaviest of bales, and last longer with less wear