Feeds out literally every supplementary type of feed, including whole round and square bale of all types, shapes and sizes as well as loose feed such as fine chop grass silage, corn/maize silage, root crops, vegetables, by-products and much more.
Introducing the all-new Combi RX² multi-feeder range. With unique features delivering unprecedented feeding versatility, standing as the lowest maintenance wagon on the market, offering unrivaled maneuverability and enhanced feed control. Built upon the success of its predecessor, the Combi RX² incorporates valuable user feedback for an even better feeding out experience.
With more than a decade of extensive product development and testing, working on large-scale farms and ranches around the world, the Combi RX² range is ready for whatever you throw its way.
If you’re feeding a combination of bales, silage, root crops, or any other supplementary feed, then the Combi RX² is the only feeder you’ll need.
The Hustler Combi multi-feeder range is designed to accommodate all types, shapes, and sizes of bales, including straw, hay, baled silage, fine chop silage, maize silage, root crops, and virtually any type of feed you have. Its unique elevator design enables feed delivery from the side of the machine, allowing you to easily feed into troughs, feed pads, bunks, or open pastures without any spillage.
With its chainless rear floor, greaseless components, and simplified design, the Combi RX² multi-feeder wagon takes the crown as the most reliable option on the market!
Featuring 100% hydraulic drive (no PTO), self-aligning bearings for durability, a single elevator ram, protected motor drives hydraulic and electric components, the Combi RX² range is engineered to significantly reduce operating and maintenance costs. Plus, with the added convenience of central greasing as a standard feature, you’ll spend more time in the field and less time in the workshop.
The Hustler Combi range features a flat floor design that ensures a smooth transition between the unique, 2-speed chainless rear bed floor and cross floor, eliminating any spillage of maize/corn silage between them.
This innovative design prevents downtime caused by root crops bending bars and jamming the rear bed floor. With no staged floors, you’ll enjoy ample ground clearance, making operation in rough terrain a breeze. Take a closer look at the internal bin design, exclusive to the Hustler Combi RX² range, and appreciate its simplicity. The proven dividing system effectively reduces loads and stresses on drives, motors, shafts, and the floor, significantly extending the wagon’s working life.
The Combi RX² feedout wagon range offers an average 28% increase in load capacity with bales compared to other multi-purpose wagons, making it the most compact and maneuverable option in its class.
With its unique and improved drawbar design, the RX² Range provides industry-leading clearance and enhanced maneuverability. This design minimizes the risk of damage to gate posts or the machine itself, offering operators a hassle-free experience. In fact, the RX148² boasts a remarkable turning circle of 7.8 meters (23 feet), while equivalent-sized wagons require 20.8 meters (65.6 feet)!
With industry-leading visibility on the load behind, feeding out perfect feed rows has never been easier, putting you in control.
The Hustler Combi RX² range offers see-through visibility on the bin and the elevator thanks to openwork panels. The ability to see the entire load from the comfort of your seat and the addition of new elevator spill panels allows you to see precisely how much feed you carry and how much is coming up the elevator, resulting in improved feed control and operator safety.
Select the product, then options, and accessories to create your inquiry.
Includes as standard equipment:
Includes as standard equipment:
Includes as standard equipment:
FeedLink in-cab mounting and display for wireless scales includes iPad & Ram mounting system
Road Visibility Kit – Includes front & rear hazard panels, safety chains & LED road lights
The original Combi joystick control system for full control over all floors
The entry-level Combi control option (recommended for feeding chopped silage only). Requires 3 sets of hydraulics
Largest pivot surface and maximum oscillation.
Rear floor is powered by hydraulic cylinders and greaseless slides for low maintenance and longevity.
FeedLink in-cab mounting and display for wireless scales includes iPad & Ram mounting system
Road Visibility Kit – Includes front & rear hazard panels, safety chains & LED road lights
The original Combi joystick control system for full control over all floors
The entry-level Combi control option (recommended for feeding chopped silage only). Requires 3 sets of hydraulics
Largest pivot surface and maximum oscillation.
Rear floor is powered by hydraulic cylinders and greaseless slides for low maintenance and longevity.
FeedLink in-cab mounting and display for wireless scales includes iPad & Ram mounting system
Road Visibility Kit – Includes front & rear hazard panels, safety chains & LED road lights
The original Combi joystick control system for full control over all floors
Round Bales (single layer): | 3-6 |
Medium Squares: | 6-8 |
Large Squares (8ft long): | 6-8 |
Loose Silage (load-level): | 14 m³ | 495 ft³ |
Loose Silage (heaped load): | 16.5 m³ | 582 ft³ |
Maximum Load: | 10,000 kg | 22,046 lb |
Overall Width: | 3015 mm | 118.7 in |
Overall Length: | 6920 mm | 272.4 in |
Overall Height/Loading Height: | 2432 mm | 95.7 in |
Tare weight: | 4200 kg | 9259 lb |
Standard Tyres: | 400 / 60 x 15.5 Flotation Grip Tread |
Axle: | Tandem Walking Beam |
Brakes: | Optional 2 or 4 Wheel Braking |
Weigh Scales: | Optional Feedlink weighing and feed management system |
Floors (Bed Floor / Cross Floor): | 15 mm (0.6 in) HD Puck Board |
Chains (Bed / X floor / Elevator): | Chainless / Twin 12,000 lb Roller Chains / Twin 12,000 lb Roller Chains |
Feed bars (Bed / X Floor / Elevator): | Single Hydraulic Rams / 65 x 35 RHS / 40 x 40 RHS |
Joystick: | In-cab Electric Control w/ Bales and Silage Mode |
Hydraulics required: | 2 x double-acting |
Hydraulic Flow: | 50-70 L/min (80 L/min maximum) | 13.2-18.5 gal/min (21.1 gal/min maximum) |
Hydraulic Pressure: | 2050-2500 psi | 140-170 bar |
Elevator width: | 1645 mm | 64.7 in wide chain/slat |
Jack: | 80 mm | 3.1 in 2-speed screw, with quick adjustment. Designed strong enough for use as quick hitch stand |
Towing Eye: | 50 mm | 2 in swiveling forged eye |
Round Bales (single layer): | 3-8 |
Medium Square Bales: | 8-10 |
Large Square Bales (8ft long): | 8-10 |
Loose Silage (Load Level): | 17 m³ | 600 ft³ |
Loose Silage (Heaped Load): | 20.5 m³ | 724 ft³ |
Maximum Load: | 14,000 kg | 30,865 lb |
Overall Width: | 3015 mm | 118.7 in |
Overall Length: | 7898 mm | 311 in |
Overall Height/Loading Height: | 2496 mm | 98.3 in |
Tare weight: | 4900 kg | 10803 lb |
Standard Tyres: | 500/50 x 22.5 Flotation Grip Tread |
Axle: | Tandem Walking Beam |
Brakes: | Optional 2 or 4 Wheel Braking |
Weigh Scales: | Optional Feedlink weighing and feed management system |
Floors (Bed Floor / Cross Floor): | 15 mm (0.6 in) HD Puck Board |
Chains (Bed / X floor / Elevator): | Chainless / Twin 12,000 lb Roller Chains / Twin 12,000 lb Roller Chains |
Feed bars (Bed / X Floor / Elevator): | Twin Hydraulic Rams / 65 x 35 RHS / 40 x 40 RHS |
Joystick: | In-cab Electric Control w/ Bales and Silage Mode |
Hydraulics Required: | 2 x double-acting |
Hydraulic Flow: | 50-70 L/min (80 L/min maximum) | 13.2-18.5 gal/min (21.1 gal/min maximum) |
Hydraulic Pressure: | 2050-2500 psi | 140-170 bar |
Elevator: | 1645 mm | 64.7 in wide chain/slat |
Jack: | 80 mm | 3.1 in 2-speed screw, with quick adjustment. Designed strong enough for use as quick hitch stand |
Towing Eye: | 50 mm | 2 in swiveling forged eye |
Round Bales (single layer): | 4-10 |
Medium Square Bales: | 10-14 |
Large Square Bales (8ft long): | 10-14 |
Loose Silage (Load Level): | 21.4 m³ | 755 ft³ |
Loose Silage (Heaped Load): | 26 m³ | 918 ft³ |
Maximum Load: | 17,000 kg | 37,478 lb |
Overall Width: | 3015 mm | 118.7 in |
Overall Length: | 9399 mm | 307 in |
Overall Height/Loading Height: | 2609 mm | 102.7 in |
Tare weight: | 6980 kg | 15388 lb |
Standard Tyres: | 500/50 x 22.5 Flotation Grip Tread |
Axle: | Tridem Steering Suspension Axle |
Brakes: | Optional 6 Wheel Braking |
Weigh Scales: | Optional Feedlink weighing and feed management system |
Floors (Bed Floor / Cross Floor): | 15 mm (0.6 in) HD Puck Board |
Chains (Bed / X floor / Elevator): | Chainless / Twin 12,000 lb Roller Chains / Twin 12,000 lb Roller Chains |
Feed bars (Bed / X Floor / Elevator): | Twin Hydraulic Rams / 65 x 35 RHS / 40 x 40 RHS |
Joystick: | In-cab Electric Control w/ Bales and Silage Mode |
Hydraulics Required: | 3 x double-acting |
Hydraulic Flow: | 50-70 L/min (80 L/min maximum) | 13.2-18.5 gal/min (21.1 gal/min maximum) |
Hydraulic Pressure: | 2050-2500 psi | 140-170 bar |
Elevator width: | 1645 mm | 64.7 in wide chain/slat |
Jack: | 80 mm | 3.1 in 2-speed screw, with quick adjustment. Designed strong enough for use as quick hitch stand |
Towing Eye: | 50 mm | 2 in swiveling forged eye |
Bid farewell to chains with the rear floor of the Combi RX² multi-feeder range! Our innovative design features a twin-speed rear pusher blade using hydraulic cylinders and greaseless slides with up to 5 times longer replacement life (if you ever get to replace them!) ensuring smooth operation, minimal maintenance and extended service life. The Combi RX² also includes a redesigned pusher blade for increased strength, simplicity and reduced weight.
Internally ported rams eliminate hose failures and downtime, showcasing another clever innovation from Hustler. The Combi RX² multi-feeder range features larger pushing rams to provide up to 34% greater pushing power. Massive sticky, dense, wet loads are a breeze.
The standard Feed Control™ in-cab electric joystick provides precise control over all feeder functions, allowing for easy management of various feed types and densities. Automated and manual control over each floor with a silage and bale feeding modes are readily switchable for optimal efficiency.
Featuring high-tensile Bisalloy® sprockets, robust zinc-plated 24,000lb combined-strength roller chains, and larger 47.5 mm (1.87 in) diameter rollers and pins, the Combi RX² handles demanding loads effortlessly. The new chain guides on the cross floor ensure straighter tracking with no derailing, while larger RHS feed bars offer optimal strength.
The heavy-duty 15-mm (.59-in) thick puckboard floors of the Combi RX² endure heavy loads with ease while providing a smooth surface for efficient feed flow. Compared to wood or steel, they offer reduced friction, cutting power requirements for smoother feed movement. The new wider cross floor design reduces crushing and jamming, with a steeper left-hand side to minimise operator errors.
The curved elevator, shaped like a hockey stick, is a new advancement in feed delivery technology for the Combi RX² range. Combined with its special feedbar design, this curved elevator offers better trough feeding, ensuring a more even distribution of feed across the trough. The improved release point guarantees accurate feed placement, enhancing feeding efficiency and reducing waste.
When it comes to visibility no other wagon beats a Combi RX². See right through from the cab to the rear of the machine with an unobstructed view through the entire wagon and cross floor providing safety and efficiency during feeding operations. The clever cut-out design of the front panel means you can also see the feed coming out of the side elevator.
The massive 2,200 cm² (341 sq²) pivot surface area and 100 mm (4 in) diameter pivot pins ensure outstanding strength and minimize the risk of axle failure. With the pins bolted on the outside and securely fastened on the inside, there’s virtually no chance of them loosening. Additionally, the tandem axles offer a 15-degree oscillation, setting another industry standard.
The Combi RX² drawbar provides superior manoeuvrability and generous linkage arm clearance. The new angled chassis rails in the Combi RX² range allow sharper turns, reducing the risk of tire rubbing. This design evenly distributes the load, when both on the jack and attached to the tractor, eliminating the need for a parking stand.
Featuring a bolted drawbar eye, the Combi RX² is adaptable to various hitch types, including fixed eye, swivelling, clevis, or spoon type hitches. Its ample clearance also accommodates pickup hitches seamlessly.
All chains feature adjustable tensioners with convenient access for prolonged lifespan and straightforward maintenance. The latest upgrades in the Combi RX² multi-feeder range enhance reliability with increased tensioner adjustment range and improved access makes servicing easier.
Combi RX² multi-feeder range features self-aligning bearings for more flexibility, reduced friction, lower maintenance requirements and longer service intervals, enhanced load distribution and reliability compared to bushes.
Featuring a single elevator ram and an enhanced motor, the Combi RX² ensures efficient operation and minimal maintenance. Positioned to avoid damage from debris, the elevator ram eliminates twisting and protects the seals from tire debris and silage juices. Additionally, the revamped motor connection system provides a secure, locked-on and foolproof solution, with 3 redundancies built in for reliability preventing downtime.
Cleverly integrated tie points along the wagon’s length allow for easy tying of square bale strings, enhancing operator safety and convenience. Simply cut, tie, and clean bale strings after feeding out.
The unique design of the Combi RX’s load cell integration, 2.46 times stronger than the old design, simplifies scale installation. With fewer load cells, there’s less wiring, fewer electronics, and fewer potential issues.
All vital components of the Combi RX² are safeguarded, ensuring heightened safety and reliability. This includes fully shielded hydraulic motors, drives, and load cells, conveniently located hydraulics and electric valves beneath an accessible bonnet cover at the front of the machine, and covered driveshafts to prevent feed material wrapping and reduce the risk of jamming and blockage.
Combining both form and function, the new high-density polyethylene, easy-to-access front bonnet, and redesigned antenna, paired with the new angled chassis rails design, provides a modern aesthetic touch to the Combi RX² while protecting hydraulics and electric valves from the elements and scale antenna from impacts whilst loading, and improving turning radius.
Innovatively designed, the Combi RX² features a single set of elevator spillage fans, minimising maintenance requirements. Through clever engineering, we’ve reduced the number of fans needed for the required tilt angle, eliminating 14 wearing parts from the design and streamlining operation for enhanced simplicity and efficiency.
Featuring the largest ground clearance on the market, the Combi RX² ensures that its elevator remains out of harm’s way, reducing the risk of damage to the machine’s vital components when operating on uneven terrain.
On the RX218² model we developed an improved spring and sub-frame design featuring Bisalloy wear plates with an improved design and thickness so rest assured operators can expect reduced greasing requirements, less wear and lower maintenance, resulting in a wear-block design that no longer requires replacement catering to the needs of high-end users.
The load dividing design of the Combi RX² ensures reduced stress on all drives, contributing to the longevity of the machine. Additionally, with the floors traveling less per load, they experience less wear and tear compared to other wagons.
This standard feature facilitates safe and easy access to the wagon for tasks like removing bale strings. On larger models, a NEW foldable ladder and handrail are included for added convenience.
Standard integrated hose holder, strategically positioned on the drawbar at the front of the machines, minimise the risk of hose chafing and subsequent downtime.
Standard hydraulic gearbox drives are now integrated into all Combi RX² models to eliminate moving parts, enhancing reliability and boosting drive power.
Included as standard equipment on all models within the Combi RX² range, our unique feedpad optimised design eliminates feed spillage from underneath the side elevator and prevents feed from accumulating and dropping between the rear and cross-floor, significantly reducing mess on your feedpad – a definite advantage over traditional chain-driven rear floors found on other feedout wagons!
Standard on all Combi RX² models, the central greasing station simplifies maintenance by reaching difficult-to-access grease points.
Built-in cable and hose tracks come standard to shield against potential damage. In the latest Combi RX² models, hose routing has been optimised to minimize chafing and enhance flow.
Tapered mudguards/fenders are included as standard equipment on all wagons in the Combi RX² range to prevent material buildup during loading.
Get Out There, in Hustler Country episodes and the latest news