The top of the range mounted bale processor, Chainless X2500 feeds every type of round or square bale and has been proven on more bale types than any other feeder and it minimises feed waste. It’s self-loading with a patented, hands free quick hitch system, that makes connecting the feeding cradle to the headstock quicker and easier. A new tougher drive system eliminates downtime and is rated to handle 2750lb bales with ease.
The addition of a new Axial Rotor with centralizing paddles keeps the bale positioned in the centre of the feeding chamber to minimize wastage and provide better grip on soft bales.
The Chainless X2500 is the most versatile bale feeder, it will feed out any bale, round & square.
Infinite variation in feed control, allows you to feed thick for cattle, thin for sheep to increase the palatability for your stock.
Hustler’s proven polyethylene platforms with ribbed design keeps bales tracking straight and with 30% less friction than steel it reduces drag on the bale which makes feeding out sticky bales easier and it will never corrode. The X2500’s platform is wider to reduce waste with sloppy bales.
The Easy Clean Hypaflo Wiper Panel minimizes blockages and ensures that hay drops outside the wheel tracks to avoid being flattened into the mud. A quick release latch releases the wiper panel for easy cleaning.
New sandblasted finish and improved paint system means your new Chainless X2500 will look smarter for longer.
A quick release latch releases the wiper panel for easy cleaning.
Another industry first from Hustler! Quick coupling grips make connecting hoses easier and the color coded for easy coordination.
Many hours of research and development have gone into the shape of the teeth to make them easier to clean, and have more aggression on tight bales. The X2500 has 5 teeth per rotor to provide extra grip on soft bales.
The headstock design allows for optional loader mounts to be bolted direct to the frame, allowing the feeder to be operated on a loader or telehandler. This provides hay and fuel savings when using the Chainless X2500 for feeding into bunks, TMR mixers, and hay rings.
We’ve used specifically designed forged bale spears which pierce the bale rather than pushing it and are longer which reduces bale sag even with the wettest of bales, another innovation from Hustler.
High mounted connection latches on both sides of the feeder take the load off the cradle, which removes any load from the bale spears. This provides a more reliable, positive connection to handle the heavier bales it has been tested to handle.
We’ve made one tyne longer than the other for quick and easy alignment when reconnecting the cradle. You’ll only need to line up one tyne, then back straight in.
We’ve protected the motor from coming into contact with the tractor tyre, which can save you costly downtime and repairs when your tractor has short linkage arms.
We’ve included two grab bars, so you can tie the square bale strings to the platform. This saves the operator having to remove the strings before feeding out.
The position of the new platform design is adjustable to suit any bale type you may need to feed out, from the worst of miss-shapen bales to the tightest packed square bales, the X2500 handles them with ease.
We’ve eliminated troublesome bushes from the drive system of the new X2500, this reduces maintenance, increases service life, reduces the need for frequent greasing and saves you a whole lot of frustration.
Built to take the heaviest of bales, and last longer with less wear.
Increases bearing, sprocket and chain drives all designed to handle heavier bales, with less to maintain.
The new X2500 with its huge new monocoque chassis is the toughest on the market and is now rated to handle 2750lb bales.