A self-loading 3-point-linkage mounted Chainless bale processor suitable for feeding out all square bales, tight and loose round bales and it maximizes feed use. Ideal for farms feeding 50-1000 bales each year.
"I’m Darryl Dostal from Rice Lake, Wisconsin. I enjoy running the Hustler, it handles the hay better than anything I’ve run for products for busting up round bales. I got the Hurricane on this one and it tears it apart, fluffs it, more than I can ask for in any other machine I’ve run, I’ve run several different ones, and I wish these would have come out years ago. I do about 40,000 small squares and this will help me cut down on manpower making them."
- Darryl Dostal, Rice Lake, WI - CH2000 Hurricane
“After having feeding out more than 23,000 bales, with minimal maintenance carried out over the last 13 years and with no major breakdowns, the decision was easy. We purchased our second Chainless 2000 without hesitation. The only problems we had with this machine were due to human error”
- Wagyu Beef farm, Hawke's Bay, New Zealand. Chainless 2000
SIMPLE AND SAFE DESIGN The innovative Chainless design eliminates feed chains, meaning fewer moving parts. The result is very low maintenance plus simple and safe operation.
ROUNDS AND SQUARES The true square and round balefeeder range found on the New Zealand market today, the Chainless range allows you to feed out virtually any bale you have on hand with ease.
THE FEED SAVE Our Chainless feeders use your feed efficiently; you can infinitely vary the amount of feed flowing over the side by adjusting the speed of either the feed rotors or the tractor speed. Thin for sheep, thick for your dairy heard – no problem with Chainless! Tight core, sloppy balage – no problem with Chainless! The infinitely adjustable bale chamber let you choose the bale pressure on demand from the cab
NO HASSLE ROTORS Designed to tease the bale out rather than simply unroll it, our rotors are self-cleaning, eliminating feed wrapping.
LONG LIFE FEEDBED Our polyethylene feedbed is slippery to reduce bale friction when feeding out and it’s also non-corroding, extremely tough and has been proven on 1000′s of farms worldwide.
Feeds almost any bale
Feeds out both rounds and squares easily - Doesn’t matter which way the bale goes on - Feeds balage, Hay, Straw, etc
Paddles on lower drum help when feeding out sloppy bales.
Top rotor turns 3 times faster than bottom rotor – excellent teasing action provides fluffed up windrow reducing wastage > No troublesome feed chains to jamb, stretch or break > Fully enclosed drive transmission protected from damage > Paddles for handling even the sloppiest of bales > Spiral timed teeth makes for smooth running
Rotor teeth release the feed off the taper at the correct point. They're also self cleaning so hay doesn't get jammed between the timed rotors
Low maintenance drive
Heavy duty hardened 1” drive pins > 400cc motor > Outboard bearing blocks are in a good position to keep clean and greased > Automatic drive chain tensioners mean no adjustment are necessary > self aligning bearings are free running and protected behind drive covers
Prevents long chop bales from jamming > Requires less power to drive due to free flowing design > Adjustable to suit any preference of feeding and allow additional reach
Adjustable platform height
Infinitely variable bale pressure control from inside the cab allows you to feed out the tightest bale cores or the sloppiest of bales > Built in height guides for easy feeding > Safety latch so operators can’t drive out while platform is up > For different bale types blank bars or bars with more aggressive teeth are available
The high rear bar means the bale cannot screw off the back on hills and is now stronger to handle heavier bales
Fully enclosed – no wastage of expensive feed > Polyethylene is impervious to UV, non corrosive, slipery to reduce drag and drive power, easily repairable and very shock resistant > Built in bale guides to keep bales tracking straight
Super low cradle is easy to load with 3PTL and means you don’t rely on a front end loader (FEL) > Right tyne is longer than the left so easy to reconnect to the cradle > Slotted top link hole so linkage can float when reconnecting > Cat 1 & cat 2 mounting points
Designed for minimal damage to wet ground
490kg - the lighter components allow a greater strength to weight ratio. This is achieved by using high grade steel (50% stronger than mild steel) and clever engineering > High hook position means the weight is distributed across 3 points and the strain comes off the ends of the tines