A self-loading 3-point-linkage mounted trough feeder suitable for feeding out into troughs, feed bunkers, over fences or onto feedpads a wide variety of mainly round bales and silage along with some square bales when using the optional side bars. The SL450X is suited for farms feeding out 50-800 bales each year.
“I find this a very good feeder for feeding in the troughs, it’s very accurate to get it in there, no spillage.” [video width="1280" height="720" mp4="http://www.hustlerequipment.co.nz/wp-content/uploads/sites/3/2013/09/Chris-Jennings-SL450X-West-Coast-New-Zealand.mp4"][/video]
- Chris Jennings, West Coast, New Zealand - SL-450X
Easy to use. Single level feed control make it very easy to use and ideal for share milkers.
Toughest chain on the market. Super strong roller chains with the combined strength of 24,000lbs, with tough 40mm x 40mm zinc-plated bars. Bars are bolted to the chain, a stronger and more easily replaceable system.
Tough polyethylene floor. Non corrosive, impervious to UV, slippery, easily repairable and very shock resistant. Fully enclosed – no wastage of expensive feed. Long bed can take 5’ long bales.
Low maintenance. Instead of bushes we use longer lasting block bearings, mounted outboard to keep them clean and free of damage.
Best bale security on the market. The high rear bar means the bale cannot screw off the back on hills. Optional side rails are available.
Our 6 tooth sprockets are made from Bisalloy (the same material a bulldozer blade is made from) so they last forever. With smaller diameter sprockets less torque is required to drive the chains, giving more drive power for tough bales. Designed so it is impossible for chain to jump off the sprocket saves you downtime in the field. The chain runs on a roller at the main elevator pivot, eliminating any further chain wear.